0 item(s)

Inverter EnerDC Nitro 5000VA

  • Full sine wave;
  • 5000VA / 5000W;
  • 48V nominal voltage;
  • Supply load from Grid or PV, even battery is not available;
  • MPPT charger for up to 5000Wp PV power;
  • АС charger 60А;
  • LCD display.

SKU: enerdc5000n
1789 €912.39 VAT included

Availability: In stock

Delivery time: 40 days

  • Buy 2 for €875.89 each and save 4%
Inverter EnerDC Nitro 5000VA is available for purchase in increments of 1

This unit is equipped with MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank. Transformerless design provides reliable power conversion in compact size. Besides, it’s worry-free to start up motor-type loads such as refrigerators, motors, pumps, compressors and laser printers as well as electronic loads like TVs, Computers, power tool and battery chargers.


  • Pure sine wave inverter
  • LCD display with many features - Read real-time PV voltage , PV current, Battery voltage, Battery current, AC input, AC output or check historic data
  • This model can operate even if no batteries are connected to it leading to huge cost-savings.. In order to to that - AC must be present
  • Output power factor 1
  • Built-in battery equalization function to extend battery life cycle
  • Built-in MPPT solar charge controller
  • Selectable input voltage range for home appliances and personal computers
  • Selectable charging current based on applications
  • Configurable AC / Solar input priority via LCD setting
  • Compatible to mains voltage or generator power
  • Battery equalization for optimized battery performance and lifecycle
  • Fully programmable inverters
  • Intergrated bluetooth communication and optional WiFi card

Operating modes:

  • Works with or without PV panels: the inverters can be connected to PV panels in various configurations. Check specifications below for more information
  • Works with or without batteries: If Nitro 5000V is connected to Solar panels and AC grid - it can operate without batteries! If your panels do not produce enough energy - the inverter takes it from the AC grid.
  • Works with or without AC grid or Gen-set: the inverters can be connected to AC grid, which can be used to either charge the batteries or supply additional power to meet the demand of the connected appliances.
  • Uninterruptible power supply: Nitro 5000 can be used as reliable uninterruptible power supply (if batteries are connected). Large battery banks can provide hours of back-up energy.

Example applications:

  • Energy storage systems (ESS) or off-grid applications - just connect the unit to PV panels and batteries for back-up power. Nitro 5000 will be the heart of your solar system.
  • Grid-connected Self-consumption without batteries - connect PV panes and use their energy to directly power your loads without feeding-back energy. You need AC grid for that !
  • Use the unit together with a battery bank as UPS system

Inverter EnerDC Nitro operating modes

EnerDC Nitro 5000VA 48VValues
RATED POWER 5000VA / 5000W
Voltage 230V
Selectable Input Voltage Range 170-280 VAC OR 90-280 VAC
Frequency range 50Hz
AC Voltage Regulation (Batt. mode) 230VAC +/- 5%
Surge Power 10000VA
Efficiency (peak) 90% ~ 93%
Transfer time 10ms (for personal computers) 20ms (for home appliances)
Waveform Pure sine wave
Battery Voltage 48Vdc
Floating Charge Voltage 54Vdc
Overcharge Protection 63Vdc
Solar charger type MPPT
Maximum PV Array Power 4000W
Maximum Solar Charge Current 80А
Maximum AC Charge Current 60А
Maximum charge current 80A
Dimension, D x W x H (mm) 115 х 300 х 400
Net Weight (kgs) 10
Communication interface USB/RS232/RS485/Bluetooth/Dry-contact
Humidity 5-95% Non-condensing
Operating Temperature* -10 to 50°C
Storage Temperature -15 to 60°C

* Above 35°C the power output derates