Accessories

Photovoltaic fuse 12A DC

Mega Fuse holder

VE.Can RJ45 terminator (bag of 2)

Mega Fuse 250A; maximum voltage: 32V

Mega Fuse 100A; maximum voltage: 32V

Mega Fuse 60A; maximum voltage: 32V

Mega Fuse 500A; maximum voltage: 32V

Mega Fuse 80A; maximum voltage: 32V

Mega Fuse 300A; maximum voltage: 32V

VE.Direct cable 3m

DC Fuse 125A - 5pcs

DC Fuse 100A - 5pcs

VE.Direct to BMV60xS cable 0.9

DC Fuse 200A - 5pcs

VE.Direct to BMV60xS cable 1,5m

Blade for 300W-500W wind turbine. Length = 1100mm

Wall mounted enclosure for BMV or MPPT Control

Mega Fuse 500A; maximum voltage: 32V

Blade for 300W-500W wind turbine. Length = 1250mm +/- 10mm

VE.Direct to BMV60xS cable 3m . To be used for Battery monitor 600 by Victron Energy

M8 circular connector Male/Female 3 pole cable 1m (bag of 2)

A single blade for 500W wind turbine without flange. Length: 1200mm

Modular fuse holder for MEGA-fuses

Second hand product! Blade for 1000W wind turbine without flange

M8 circular connector Male/Female 3 pole cable 3m (bag of 2)

Second hand Blade for 2500W wind turbine without flange

Busbar

Wall mounted enclosure for Color Control GX and BMV or MPPT

Ние сме официален вносител и сервиз на Victron Energy

Измерва зарядния ток и пресмята енергията от мрежови инвертор , който е включен към АС входа или изхода на MultiPlus или Quattro инвертори.

Second hand product! 3pcs blades and 1 flange with radius 1200mm

VE.Direct to Global Remote interface

Power Inlet stainless with cover 16A/250Vac (2p/3w)

• Ние сме официален вносител и сервиз на Victron Energy B.V.
• Този продукт е с 5 годишна гаранция от производителя.

Неръждаем контакт с капак за брегово захранване на яхти кемпери и др. 32A/250Vac (2p/3w)

Prevent any electrolytic current

Maximum AC current 16A

Peak current (20 ms) 1600A

3pcs blades and 1 flange with radius 1020mm Can be used as spare parts in our 300W wind turbines

Shore Power Cord 15m 16A/250Vac (3x2,5sqmm) Victron Energy

3pcs blades and 1 flange with radius 1200mm

3pcs blades and 1 flange with radius 1200mm Can be used as spare parts in our 500W wind turbines

Shore Power Cord 25m 16A/250Vac (3x2,5sqmm)

Prevent any electrolytic current

Maximum AC current 32A

Peak current (20 ms) 3200A

3pcs blades and 1 flange with radius 1340mm Can be used as spare parts in our 1000W wind turbines

Water resistant IP56. LED- indicator for outside network. Security tap. 32A 25m Victron Energy (3x4mm^2)

The TRANSFER SWITCH is designed to take over automatic switching between different power sources. Transfer time: 10 - 20 msec.

5kVA

Water resistant IP56. LED- indicator for outside network. Security tap. 32A 25m Victron Energy (3x6mm^2)

The TRANSFER SWITCH is designed to take over automatic switching between different power sources. Transfer time: 10 - 20 msec.

10kVA

Filax the ultra-fast transfer switch 230V/50Hz, 240V/60Hz, 110V/50Hz, 120V/60Hz

Maximum current - 16А

Maximum load transfer time and reverse transfer time-  16ms

Reverse switching delay (second)-    30 sec

The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarm

Input:  115 or 230V

Output: 115 or 230V

Frequency:  50/60 Hz

Rating: 17/8.5 A

Soft start: Yes

The Li-ion Battery Tower fits four Lithium batteries 60Ah or 90Ah and a VE.Bus BMS. Wiring for 25,6V or 51,2V is included. The VE.Bus BMS and batteries are not included.

The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarm

Input:  115 or 230V

Output: 115 or 230V

Frequency:  50/60 Hz

Rating: 32/16 A

Soft start: Yes

The generators are most often used for power saving at private homes, powering remote locations and for communication systems. They are suitable for hybrid wind-solar systems – a combination of wind turbine and photovoltaic modules. Thus you can employ the advantages of both energy sources. With their light weight and full documentation, the turbines are very easy to install and maintain

The Isolation Transformer eliminates any electrical continuity between AC shore power and the boat. It is essential for safety and eliminates the need for galvanic isolators and polarity alarm

Input:  115 / 230V

Output: 115 / 230V

Frequency:  50/60 Hz

Rating: 32/16 A

Soft start: Yes