0 item(s)
Filter by
Price
  1. 15
    2061

Accessories

Accessories for batteries - fuses, battery-protects, relays

  1. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 65A

    Peak current (during 30 seconds) 300A

    Operating voltage range 6-35V

  2. VE.Bus miniBMS Battery management system for lithium batteries Victron

  3. The Battery Balancer equalizes the state of charge of two series connected 12V batteries, or of several parallel strings of series connected batteries.
  4. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A

    Peak current 600A

    Operating voltage range 6-35V

  5. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 220A

    Peak current (during 30 seconds) 600A

    Operating voltage range 6-35V

  6. The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
  7. The BMS will: 1.Disconnect or shut down the load whenever the voltage of a battery cell falls to less than 2,5V. 2.Stop the charging process whenever the voltage of a battery cell increases to more than 4,2V. 3.Shut down the system whenever the temperature of a cell exceeds 50°C.
  8. Battery combiner used in campers, yachts , caravans, etc. Can be used in 12V and 24Vdc systems
  9. The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

    Maximum continuous load current 100A

    Peak current 250A

    Operating voltage range 24-64V

  10. The BMV-700 is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.
  11. The BMV-712 smart is our newest high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  12. This battery management system is for Victron's lithium batteries. For more details regarding the product and its usage - please, contact us!
  13. Features:

    • 5 step charging algorithm from smart and conventional alternators and solar panels
    • Automatic battery separator works without the need for diodes or relays
    • Selectable higher output (14.7) or standard one - 14.4V
    • Parallel input from both alternator and solar panel
    • MPP-tracker with max Voc = 23V !
    • Starter battery maintenance charging when your service battery is fully charged
  14. Battery combiner used in campers, yachts , caravans, etc. Can be used in 24V and 48Vdc systems
  15. Battery combiner used in campers, yachts , caravans, etc. Can be used in 12V and 24Vdc systems
  16. Features:

    • Fully automatic
    • Maximizes battery life
    • Battery Guard to protect your secondary battery from total discharge
    • Dynamic over current protection to handle temporary inputs and outputs of up to 350A for fast charging
    • Battery temperature protection for added safety
    • Splash and dust proof (IP65)
  17. VE.Bus Battery management system for lithium batteries Victron - 1000A