0 item(s)

EnerDC MPPT solar charge controller 150V - 40A with display

  • Max PV voltage: 150V at -20 deg. C; 138V at 25 deg. C
  • Day/night timing and light dimming option
  • Ultra-fast Maximum Power Point Tracking (MPPT)
  • Load Output
  • Max. charging current: 40A ; 24V or 48V systems

SKU: enerDC150-40
399 €203.49 VAT included

Availability: In stock

Delivery time: 8 - 15 days

  • Buy 2 for €195.35 each and save 4%
EnerDC MPPT solar charge controller 150V - 40A with display is available for purchase in increments of 1
Quantity:

Advanced MPPT real-time tracking algorithm of the EnerDC 150 | 40 solar charger

This controller allows you to charge a 24Vdc battery bank using standard 250-275Wp 60cells poly- or moncrystalline modules. The fast MPPT controller will improve energy harvest  by up to 10% compared to slower MPPT controllers.



Programmable options and auto 24/48V recognition

You can choose from two standard battery types - GEL and Liquid. Also, you can set a night-light function or low-disconnect voltage



LCD display with many features

Read real-time PV voltage , PV current, Battery voltage, Battery current or check historic data



Four-steps charging algorithm

Ensure a reliable, fast and safe charging with the four-steps charging algorithm



Many protections against various treats

Protections against: PV over current, PV short circuit, PV reverse polarity, Battery reverse polarity, Batery overvoltage, Battery deep discharge, Load short circuit, Load over current

Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output (except for inverters). The load output will disconnect the load when the battery has been discharged to a pre-set voltage


Day/night timing
You can use this controller in street-lighting applications. It can automatically start a connected load (lights) at sunset and it can stop them at sunrise, or you can set the working hours of the lights during the night

Suitable modules

A single controller can be used in various PV-configurations. Below are the most frequently-used ones. Several controllers can work in parallel.

24Vdc battery

  • Three 250-330Wp modules with 60 cells each connected in series

 

48Vdc battery

  • Six 250-330Wp modules with 60 cells three of each connected in series

Full specifications of EnerDC 90 | 20

EnerDC 150| 40Values
System voltage 24V / 48V auto recognition
Max charging current 40А
МPPT charging voltage <29.0 / 58.0V @ 25°C
Boost voltage 29.0 / 58.0V @ 25°C
Equalization voltage 29.6 / 59.2V @ 25°C (liquid batteries)
Float voltage 27.45 / 54.9V @ 25°C
Low voltage disconnect 21.6~23.6 / 43.2~47.2V
Reconnect voltage 23.2~25.6 / 46.4~51.2V
Overcharge protection 31.0 / 62.0V
Maximum voltage on battery's terminal 65V
Temperature compensation -4.17mV/K per cell (boost, equalization)
-3.33mV/K per cell (Float)
Battery type Liquid / Gel / AGM
Maximum voltage on PV terminals 150V at -20 deg. C; 138V at 25 deg. C
Maximum input PV power 1000Wp at 24Vdc systems
2000Wp at 48Vdc systems
Dusk / Dawn detection voltage 16.0V at 24Vdc systems
32.0V at 48Vdc systems
MPPT tracking voltage (Battery voltage +1.0) ~Voc 0.9
Load output current 30A
Operating mode Standard / Dusk to Dawn / Street lamp mode (2~9 hours)
Maximum tracking efficiency >99.9 %
Maximum charge conversion 98.7 %
Dimensions (mm) 189 x 255 x 89
Weight 2500g
Power terminals 16mm2
Self consumption 8mA
Ambien temperature from -20 to + 55°C
Storage temperature from -25 to +80°C
Ambient humidity 0~100% non-condensing
Protection degree IP32
Maximum altitude 4000m