Product Highlights
Safe, maintenance-free convenience
95% round trip efficiency
2 year full replacement warranty in PSoC applications
For energy arbitrage/self-consumption applications
Description
With limited sun hours for proper recharging of standard deep cycle batteries, the need for a PSoC technology is greatly needed. This advanced technology will allow for extended life of a battery in self-consumption applications. Nano-Carbon offers all the safety and convenience of a VRLA battery with the cycling benefits of advanced energy storage. Operation of Nano-Carbon in an application where full battery recharges aren’t always possible, like off-grid or areas of the world with limited sun hours, can maximize your overall cycle life by up to 44% versus a traditional VRLA deep cycle battery. The Nano-Carbon is an enhanced and optimized negative active material formulation which makes it more than just a carbon additive. The high surface area carbon is a specially formulated additive for improving the negative active material in lead-acid batteries. Carbon increases conductivity and adds additional capacitance to the battery. Nano-Carbon improves charge efficiency and allows PSoC operation with improved deep discharge recovery.
Capacity | 178Ah/C20 |
Cell per Unit | 6 |
Voltage per Unit | 12VDC |
Operating Temperature Range (w/Temperature Compensation) |
Discharge: -40 to 71ºC (-40 to 160ºF) Charge: -23 to 60ºC (-10 to 140ºF) |
Optimal Operating Temperature Range | 23 to 27ºC (74 to 80ºF) |
Recomended Maximum Charging Current Limit per String |
53ADC |
Float Charging Voltage | 13,62 VDC unit average at 25ºC (77ºF) |
Equlization and Cycle Service Charrging Limits |
14,4 VDC unit average at 25ºC (77ºF) |
Self Dischrrge |
Battery can be stored up to 6 months at 25ºC (77ºF) before a freshing charrge is required. Battery stored at temperature greater than 25ºC (77ºF) will require recharge sooner than batteries stored at lower temperatures. |
Temperature Compensation Factor (Charging) |
5mV per ºC per cell (2V) |
Terminal | Threaded copper alloy insert terminal to accept 1/4"-20UNC bolt |
Terminal Hardware Initial Torque | 110in-lbs (12,4Nm) |
Weight (lb/kg) | 131 / 60 |
Dimentions H x D x W (in/cm) | 12.60 x 22.01 x 4.95 / 320 x 551 x 126 |